Power Electronics Trainer(PET-V1)
PEL-E393B
SCOPE OF LEARNING:
- To study the characteristics of FET and plot it's V-I Characteristics.
- To study the Gate control characteristics of SCR and It's graph.
- To study the characteristics of UJT
- To study the characteristics of MOSFET.
- To study the characteristics of DIAC and plot it's V-I Characteristics curve.
- To study the V-I characteristics of TRIAC.
- To study the Resistor Triggering circuit.
- To study the Resistor-Capacitor Triggering Circuit
- To study the triggering of SCR using UJT.
- Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
- Instruction manual.
- Patch Cords 2mm Both.
- High Voltage Test Points are Provided With 2mm Safety Sockets
- The trainer is housed in ABS Plastic Cabinet.
- Size of the trainer set 12"X10"
Power Supplies:
- ± 12V at 250mA
- 0-15V at 250Ma
- 0-30V at 250mA
- 15V - 0V - 15VAC at 250mA
- Operated on Mains power 230V, 50Hz +10%
Digital Meters:
- Voltmeter/Ammeter Dual Range 20V/20mA
- Ammeter Dual Range: 20mA/200mA
- Voltmeter Dual Range: 20V/200V
Components are mounted on the panels are:
Power Devices:
- MOSFET-IRF540
- UJT-2N2646
- DIAC-DB3
- TRIAC-BT136
- SCR-TYN604
FET BS170
Capacitors on Board:
- Capacitor 1uF
- Capacitor 10uF
Resistance on Board:
- 10K,1/4W
- 100E/2W
- 220E/2W
- 22E,5W
Variable Resistor:
- 10K (1Nos.)
Firing Circuit on Board:
- R, RC Firing Circuit
- UJT Firing Circuit
- CRO